Manual Lifting Rotary Evaporator MRE-200LS is equipped with Brushless DC motor and offers a speed range of 20 to 200 rpm. It provides both manual lift and auxiliary lift for precise positioning of the glassware. It comes with a PTFE double spring sealing ring for secure sealing, preventing leaks and facilitating efficient solvent recovery. Includes an ejection mechanism for easy exchange of evaporating flask.
Rotating SpeedRotating Speed | 20 to 200 rpm |
Motor Type | Brushless DC motor |
Display | LED (speed, temperature, time) |
Clockwise and Anti-clockwise | Yes |
Heating Temperature Range | RT to 180℃ |
Overheating protection temperature | 220°C |
Control Accuracy | Water: ±1℃ Oil: ±3℃ |
Stroke Displacement | Manual 110 mm + auxiliary 100 mm |
Interval Time Setting Range | 1 to 999 s |
Protection Class | IP20 |
USB Interface | Yes |
Heating Power | 1200 W |
Permissible Ambient Temperature | 5 to 40˚C |
Permissible Relative Humidity | ≤ 80 % RH |
Power Consumption | 1245 W |
Power Supply | 100 to 120/200 to 240V, 50/60 Hz |
Dimension | Main Unit: 440 × 320 × 450 mm Heating Bath: 300 × 300 × 240 mm |
Weight | Main Unit: 7 kg Heating Bath: 3 kg |
Accessory No. | Accessory Name |
1 | Evaporating flask 50 ml NS 29/32 |
2 | Evaporating flask 100 ml NS 29/32 |
3 | Evaporating flask 250 ml NS 29/32 |
4 | Evaporating flask 500 ml NS 29/32 |
5 | Chemical resistant vacuum pump |
6 | Vacuum controller |
7 | Low Temperature Circulator |
Organic Chemistry: Used for solvent removal, concentration, and purification in organic synthesis reactions.
Chemical Laboratories: Employed for solvent evaporation in synthesis, purification, and analytical chemistry procedures.
Petrochemical Industry: Utilized for the removal of solvents and impurities from petroleum products.
Vacuum setting range | 1 to 1000 mbar |
Vacuum measurement range | 1 to 1000 mbar |
Control operation mode | Single-point control mode, |
Programmed control mode | |
Control program | Can store up to 5 programs, each containing 5-step control (capable to set the degree of vacuum and time) |
Setting method | Touch screen setting |
Display | 5 inches TFT |
Sensory overload pressure | 1,500 mbar |
Connector diameter | 8 mm |
Materials in contact with vapor | PTFE, PP, silicone and ceramics |
Temperature range | 10 to 40°C |
Humidity | ≤ 80 % RH |
Power Consumption | 600 W |
Power Supply | 110 to 240 V, 50 Hz/60 Hz |
Dimension | 189 × 207 × 193 mm |
Weight | 4.0 kg |
Maximum Vacuum | 13 mbar |
Work Mode | Continuous Operation |
Nozzle Size | 8 mm |
Motor Speed | 1450 rpm |
Flow Rate | 25 L/min |
Power | 95 W |
Model | Circulator 01 | Circulator 02 |
Range of temperature control | -15℃ to Room temperature | -20℃ to Room temperature |
Temperature adjustment accuracy | 0.1°C | 0.1°C |
Temperature control accuracy | ± 1.0℃(-20°C to 0°C typical value ± 0.5℃(0°C to 20°C typical value) | ± 1.0℃(-20°C to 0°C typical value ± 0.5℃(0°C to 20°C typical value) |
Reservoir capacity | 5 L | 5 L |
Range of temperature adjustment | -30°C to 30°C | -30°C to 30°C |
Temperature display | LED | LED |
Type of temperature sensor | PT 1000 | PT 1000 |
Compressor refrigerant | R290 | R290 |
Circulating pump throughput | 12 L/min | 12 L/min |
Circulating pump head | 6 m | 6 m |
In-out cycle interface | 12 mm pagoda-type interface | 12 mm pagoda-type interface |
RS232 interface | Yes | Yes |
Temperature range | 10 to 40°C | 10 to 40°C |
Humidity | ≤ 80 % RH | ≤ 80 % RH |
Dimension | 370 × 420 × 730 mm with caster | 440 × 460 × 730 mm with caster |
Power Consumption | 350 W | 700 W |
Power Supply | 220 V, 50 Hz/60 Hz | 220 V, 50 Hz/60 Hz, 110 V, 50 Hz/60 Hz |
Weight | 46 kg | 50 kg |
Be the first to provide a review.
Write Your Review
Be the first to pose a question.
No Q&A
Submit your inquiry.
our experts will promptly respond to you.