Potentiostat PS-10LS offers a potential control range of up to 10 V. It has a built-in dual 24-bit Delta-sigma AD converters to achieve stability and high potential and current sensitivity of 1pA. This is a versatile device that supports 2-, 3-, 4-electrode configurations. Its high-frequency impedance measurement capability improves electrolytic system characterization. Our potentiostat has a high precision current control system and offers various functions like sweep voltammetery, cyclic voltammetery and more.
System SupportUSD 10,920.00 / Each of 1
Switchable floating and earthing mode
Real-time data saving
Advanced user-friendly interface
Calibration-free operation
Compact and light-weight design
Stable voltage monitoring performance
| System Support | 2-, 3-, or 4-electrode system |
| Potential Control Range | ± 10V |
| Current Control Range | ± 2A |
| Potential Control Accuracy | 0.1%×full range ±1mV |
| Current Control Accuracy | 0.1%×full range |
| Potential Resolution | 10 μV (>100Hz), 3 μV (<10Hz) |
| Current Sensitivity | 1 pA |
| Rise Time | <1 μs (<10mA), <10 μs (<2A) |
| Reference Electrode Input Impedance | 10¹² Ω |
| Current Range | 2 nA to 2A, 10 ranges |
| Compliance Voltage | ± 21V |
| Maximum Current Output | 2 A |
| CV and LSV Scan Rate | 0.001 mV to 10,000 V/s |
| CA and CC Pulse Width | 0.0001 to 65,000 s |
| Current Increment During Scan | 1mA at 1A/ms |
| Potential Increment During Scan | 0.076 mV at 1V/ms |
| SWV Frequency | 0.001 to 100 kHz |
| DPV and NPV Pulse Width | 0.0001 to 1000 s |
| AD Data Acquisition | 16-bit at 1 MHz, 20-bit at 1 kHz |
| DA Resolution | 16-bit, setup time: 1 μs |
| Minimum Potential Increment in CV | 0.075 mV |
| IMP Frequency | 10 μHz to 1 MHz |
| Low-Pass Filters | Covering 8-decade |
| Operating System | Windows 10/11 |
| Interface | USB 2.0 |
| Signal Generator - Frequency Range | 10 μHz to 1 MHz |
| Signal Generator - AC Amplitude | 1 mV to 2500 mV |
| Signal Generator - DC Bias | -10 to +10 V |
| Signal Generator - Output Impedance | 50 Ω |
| Signal Generator – Waveform | Sine wave, triangular wave, square wave |
| Signal Generator - Wave Distortion | < 1% |
| Scanning Mode | Logarithmic/linear, increase/decrease |
| Signal Analyzer - Integral Time | Minimum: 10 ms or cycle time, Max: 10⁶ cycles or 10⁵ s |
| Signal Analyzer - Measurement Delay | 0 to 10⁵ s |
| DC Offset Compensation - Potential Range | -10 V to +10 V |
| DC Offset Compensation - Current Range | -1 A to +1 A |
| Bandwidth | 8-decade frequency range, auto/manual setting |
| Product Dimension | 360 × 340 × 140 mm |
| Packaging Dimension | 550 × 400 × 250 mm |
| Net Weight | 6.5 kg |
| Packaging Weight | 9 kg |
CS Studio Software | 1 |
Power Cable | 1 |
USB Cable | 1 |
Electrode Cable | 2 |
Dummy Cell | 1 |
Ag/AgCl Reference Electrode | Only Ag/AgCl |
Platinum Wire Counter Electrode | Only Pt wire |
Glassy Carbon Working Electrode | 3mm |
250 ml Electrochemical cell (Non-sealed) | 250 ml |
Submit your inquiry.
our experts will promptly respond to you.
